Facade insulation

Currently, facade insulation in Bryansk is an obligatory moment in the design, construction and operation of buildings. Houses are insulated from the outside, because the walls can freeze through in winter, and this leads to increased humidity in residential premises.

The facade can be insulated with various materials. Polyfoam is one of them. It is an inexpensive and effective material. Numerous air bubbles help the insulation retain the cold from the outside, which significantly reduces heat loss in the premises. Facade insulation or roof repair in Bryansk is best left to professionals.

Foam-insulated facades have their negative sides. The created insulated system must be ventilated frequently so that the internal walls do not become damp. And also, despite the fact that polystyrene is a slow-burning building material, it is toxic when smoldering.

When insulating facades, you can use extruded polystyrene foam, this insulation method is called seamless. The slabs are closed with a plaster mortar, using a reinforcing mesh.

Mineral wool can serve as a heater for facades. The technological process with its use resembles foam insulation. With this method of insulation, decorative plaster is combined with an adhesive mixture, this contributes to the creation of a hydrophobic layer on the surface of the insulation, which does not allow moisture to get into the insulation.

In this case, acrylic-based plaster is not used, since the airtight film it creates prevents moisture from escaping. The algorithm of work on the insulation of facades of different systems is very similar, but each has its own nuances. At the initial stage, the surfaces are prepared for insulation. Then, along the entire perimeter of the lower part of the building, basement profiles are strengthened and the outer area of ​​the enclosing structures is primed.

Next, the adhesive mixture is distributed over the plates intended for insulation, glued to the outer wall panels. Seal gaps with sealing material, create expansion joints.

The plates are fixed with bolts, washers and dowels, then a waterproofing solution is applied. Perforated corners, reinforcing mesh are fixed along the facade of the building. The treated surface is primed and plastered. Roof canopies are mounted and window metal peaks are fixed. At the last stage of facade insulation, the system is finished with paints.  Compliance with the technology when insulating facades ensures maximum effect and long service life, no freezing and aesthetic appearance.