Installation of sockets and hoods in the bathroom.

Became fashionable and simply necessary to conduct wiring to the bathroom. With the advent of mirrors with backlight, jacuzzi and other diveis, it is simply vital, to have a socket in the bathroom, otherwise why then all this is produced and bought.It is better if the installation is carried out by a specialist, since the bathroom is a rather dangerous place for electrical devices. To date, only high -class and certified masters are offered electrical work in Moscow and other cities who can be trusted.

Independent installation.

The bathroom is a room with high humidity, so it is necessary to install special moisture -proof sockets. These sockets have a durable plastic case, as well as plastic curtains that protect the inside of the outlet from moisture. For additional protection, they sell special crimp rubber rings that hermetically close the entire structure.

It is necessary to install the socket as far as possible from the sink and bathtub. It is better to arrange an autonomous electrical line, consisting of three wires and connected to the nearest shield. The process of installing this outlet occurs as usual.

The bathroom in a typical high-rise building is usually equipped with a ventilation shaft. To clean it for better functioning, it is necessary to remove the ventilation grill and put on a glove, wrap your hand around it, stick your hand into the shaft with some rag and clean it with rotational movements.

For better ventilation, a fan can be installed on the vent. Because without sufficient ventilation in the bathroom, condensation can form that can damage the coatings of mirrors, furniture and household appliances available there.

Typically, the ventilation system of the bathroom and toilet is combined, so you should install fans with a check valve. It is better to take a fan with adjustable power and an on and off mode.

It is more convenient to mount the fan during repair, if this is not foreseen, it is necessary to determine the type of inclusion of this device. You can connect it to a light switch or make a separate switch. If the first option is selected, the fan will start as soon as the light turns on and turn off when it goes out.